Building the 2mm 08 shunter kit

If you've seen the instructions for the 2mm Scale Association 08 shunter kit, you'll know what a good result an experienced loco builder can produce. I make no such claim, but I aim to learn through this experience, so that my next attempt will be better. Or as the philosopher said, "When one has finished building one's house, one suddenly realizes that in the process one has learned something that one really needed to know in the worst way - before one began".

Saturday, December 10, 2011

Some final thoughts

›
When I bought this kit it was the most expensive modelling purchase I'd made. I saw it as an investment that would help me learn new ski...
Friday, December 09, 2011

Final details

›
Railings I had to re-drill the holes in the sides which were barely visible by now. Only problem I had was with one of the long 5-prong rail...
Wednesday, December 07, 2011

Fixing the connecting rods

›
I shortened the overlong pins with wire clippers, then with a sheet of slitted card over the rod I fixed the nuts with tiny blobs of supergl...
Tuesday, December 06, 2011

Fixing body to footplate

›
First to add some more weight. There's room behind the nose, and scraping away some of the excess resin under the roof allowed me to add...

Fixing the windows

›
I found these pretty fiddly. They are cut from "Cobex" plastic sheet about 0.5mm wider than the window to fit into the recesses at...
Sunday, December 04, 2011

Adding the transfers

›
I'd been painting and lettering some wagon kits while this project gathered dust, so at least I now had some ideas about how to approach...

Reviving the mojo

›
I hope I'm not the only one who discusses things with themselves. These discussions usually end with me giving myself a reason not to do...
2 comments:
›
Home
View web version

About Me

Gram
View my complete profile
Powered by Blogger.